A smart solution to your home heating and cooling needs, heat pump with air handler is our most affordable heat pump with an excellent blend of efficiency and value.
SEER2 ratings of up to 16 and 9.5 HSPF2 heats and cools your home easily on the most extreme days of the year.
TEM6 air handler features a variable speed motor and Comfort-R technology for more efficient air flow for whole-home comfort.
- Cooling Stages: Single-Stage and up to 16 SEER2
- Heating Stages: Single-Stage and up to 9.5 HSPF2
- Energy savings: 50% (vs. 8-10 SEER2 AC)
- Energy Star Rated: Yes
- Climatuff™ compressor
- Spine Fin™ outdoor coil
- Upgraded condenser fan motor
- Insulated furnace blower compartment
- All-aluminum air handler coil
- Non-rust polymer drain pan
No Rebates Available
The central air conditioner’s two-stage cooling technology helps provide even cooling to every room in your home.
SEER2 ratings of up to 16 makes these central air conditioners an excellent choice for home comfort
Two-Stage systems have a 70% speed in first -stage and 100% speed in second-stage. This system will run in first stage the majority of the time, saving you much more than your old single-stage system.
- Cooling Stages: Two-Stages and 16 to 17 SEER2
- Heating Stages: Two-Stages at 96% AFUE
- Energy Savings: 56% (vs. 8-10 SEER2 AC)
- Energy Star Rated: Yes
- Two-Stage Climatuff™ compressor
- Spine Fin™ outdoor coil
- Upgraded condenser fan motor
- Insulated furnace blower compartment
- Self diagnosing control board
- Durable insulated heat exchanger cabinet
- Stainless steel secondary heat exchanger
Variable speed units continuously communicate with each other and your American Standard thermostat to provide optimal efficiency.
This system is rated up to 18 SEER with 750 stages of comfort for ultimate climate control and maximum efficiency.
Variable speed blower motor adjusts speed to provide a consistent flow of comfortable air with quiet operation. Advanced ComfortLink™ II communicating technology constantly calibrates itself for optimal performance year after year.
- Cooling Stages: 750 stages and 18 SEER2
- Heating Stages: Modulating at 96% AFUE
- Energy Savings: 56% (vs. 8-10 SEER2 AC)
- Energy Star Rated: Yes
- ComfortLink™ II communicating capability with refrigerant-cooled inverter drive
- Climatuff™ variable speed compressor
- All-aluminum Spine Fin™ coil
- Integrated fan system
- Modulating gas valve
- Variable speed draft inducer
- Variable speed blower motor
- Insulated furnace blower compartment
-
The proper building permit -
Title 24 Testing – (Airflow, Duct Leakage, Refrigerant Charge Tests)
-
Removing and disposing of the existing system
-
An easy-access filter base (for upflow/downflow systems)
-
A new secondary drain pan (for attic split systems)
-
Modifying the existing supply plenum
-
Modifying the existing return plenum
-
Reconnecting to the existing ductwork
-
A new WiFi/Smart Thermostat*
-
A new gas-flex and safety shut-off
-
The proper breakers at the main electrical panel
-
A new high voltage service disconnect and wiring for AC
-
A new foundation pad for AC
-
A precision refrigerant charge
-
New smoke detectors and CO monitors (as needed)
-
Complete clean up
- *Variable speed systems come with XL1050 ComfortLink™ II Thermostat
2 Years Preventive Maintenance for New Maintenance Customers
We’ll come out twice a year for the first two years, once in the spring/summer, and once in the fall/winter to test and clean your new system and keep it running in top shape. Nothing is due when we come out for this service.
Compressor Start
Kit
This will extend the life of your new system by taking some of the load off of starting the system up thousands of times over its lifespan.
Condensate Safety
Switch
This will be your personal watchdog for any condensate drainage that may clog in the pipes. This switch will shut down the system if it senses a problem.
